Logo Logo

lockingaugercover
Locking Auger Cover Kit

Locking Auger Cover Kit: It consists of a horizontal inner auger cover and an outer auger cover with locking mechanism. This locking mechanism holds the outer auger cover in place thus preventing easy movement of auger cover.

Instructions to install LOCKING AUGER COVER KIT

Step 1: Take off the food jar from the feeder base by holding the base firmly between your feet and pulling it straight upward. Do not turn or twist the food jar while pulling upwards as that will damage the safety switch inside the base and the safety pin on the food storage container.

Step 2: Find two screws inside the base holding the existing auger cover, unscrew those and remove the cover.

Step 3: Take off the bowl from the base.

Step 4: Remove the inner auger cover from the base unscrewing the six screws.

Step 5: Fit the new Inner auger cover in place of the old one and tighten with the six screws from inside.

Step 6: Now fix the outer flap type augercover with locking mechanism and press the two hooks so that it gets locked into the holes of inner auger cover.

Step 8: Now fit the bowl and then the food jar. Make sure that you align the safety switch while installing the food storage container.


Our Price: US$20.00

Write Review

Read Reviews


cards
Copyright 2000 - 2010 Ergo Systems Inc. All rights reserved.